| | Sector | abcPower Plant | Tender Value | INR 1 Crore | | Location | Maharashtra - India | Ref.No | 100696915 | | Closing Date | 23 - Sep - 2026 | | | Repl. STN/DTN H/w for 0.1-0.5 ACSR, Restoration of 220/132/110kV EHV Lines, DSN H/w - 0.4 ACSR Zebra Double Suspension Normal hardware for 0.4 ACSR Zebra Conductor
, Strengthening 400kV Tens Tower Stub/Leg, Repl. Cross Arm-S/C on D/C Ckt Live Susp, Fixing of Anti Theft type Step Bolt, STN H/w - 0.1 ACSR Dog STN H/W for 0.1 ACSR, C/T-P&C in situ CC M-15, DSN H/w - 525 mm² AAAC Double Suspension Normal Hardware suitable for 525 mm² AAAC, PL_Mobil&Demob. 400kV Line Gang, PL_Fix&Crimp Jumper Cone to 0.5 ACSR, Fixing Vibration Damper for 0.5 ACSR, Dismantling S/C Condr of 400kV S/C, P&Casting in-situ CC M30 Concreting of foundation by providing and Casting in-situ CC M30 of trap
metal of size 20 to 40 mm as applicable including cost of cement, sand,
metal and water, form boxes, finishing, compacting , coping and curing
for 21 days complete as per drawing and direction of Engr.In-charge.
, Check Survey - 220kV & Below Lines Check survey for 220kV & Below Lines to carry out the checks as per
approved profiles with Digital Theodalite/total station/GPS etc. and
location marking by fixing three pegs in alignment for suspension tower
and by fixing five pegs in bisection for angle tower including bush
cutting along the centre line of alignment and repeg marking if
necessary etc. complete in all respect. Check survey including revision
of profiles if required.
, Benching of Normal Soil/Sand/Gravel/S.M. Benching Earth cutting/benching for the purpose of preparing a minimum
square platform for the tower footing on the top of a hilllock including
removal of the excavated material beyond tower location upto 50 M lead
or filling it in the adjecent portion of the tower footing area in
normal soil. soft murum, soft murum with boulders., Transport of O/S Eqpt by Road upto 50km, Fixing PA Rod =220kV, Tension Clamp 7/3.66mm Earthwire (Comp) Tension clamp suitable for 7/3.66 mm Earth wire (compression Type)as per
MSETCL specification
, DTN H/w - 0.2 ACSR Panther Double Tension Normal hardware for 0.2 ACSR Panther Conductor
, Repl. Pilot Insulator String of D/C DL, Measurement Tower Foot. Resistance=220kV, Repl. DSN Insu. String =220kV M/C Line, Fab, Galvg, Supply of Tower Materials-TKP Fabrication, Galvanising, Supply at site store of towers (Viz, 2°, 15°,
30°, 60°) normal, its extensions with set of stubs, Superstructure,
templates, step bolts, U-bolts, DShackles, Chain links etc, complete as
per approved design & drawings.
, Vibration Damper - 7/3.15mm Earthwire Vibtration Damper for 7/15 mm² Earthwire, P.A. Rod - 0.3 ACSR Goat Performed Armour Rod for 0.3 ACSR Goat Conductor, Repair Sleeves - 525 mm² AAAC REPAIR SLEEVES FOR 525 SQMM, C/T-Transport dmgd Tower etc. 400kV D/C, C/T-Dismantling 220kV Tower Fdn/Loc@PA, Repair Sleeves - 0.4 ACSR Zebra Repair Sleeves suitable for 0.4 ACSR Zebra conductor
, Mid Span Cmpr Joint- 0.1 ACSR Dog 0.1 ACSR Dog conductor compression type mid span joint, C/T-Erection of New Tower, DSN H/w - 0.1 ACSR Dog 0.1 DSN, Pipe type Earthing including Excavation, ER_Mobil&Demob. 400kV Line Gang, C/T-Destringing 220kV Line Earthwire, Repl. D Shackle of Ten. Tower, Strengthening of 132kV Ten. Tower Stub, Trees Cutting/Trim@Norm. Area=220kV/Span, SSN H/w - 0.4 ACSR Zebra Single Suspension Normal hardware for 0.4 ACSR Zebra Conductor
, C/T-Prov. Temporary Stay to 220kV Tower, Trees Cutting/Trimming@Normal Area 400kV, Excavation Pit -Tower Foot in Hard Rock, DTN H/w - 0.4 ACSR Deer Double Tension Normal Hardware for 0.4 ACSR Deer Conductor, Repl. STN Insul. String =220kV M/C Line, Vibration Damper - 0.4 ACSR Zebra Vibration Damper suitable for 0.4 ACSR Zebra conductor
, Benching of Hard Rock by Chiseling Benching Earth cutting/benching for the purpose of preparing a minimum
square platform for the tower footing on the top of a hilllock including
removal of the excavated material beyond tower location upto 50 M lead
or filling it in the adjecent portion of the tower footing area in Hard
rock by Chiseling with boulders.
, SSN H/w - 0.2 ACSR Panther Single Suspension Normal hardware for 0.2 ACSR Panther Conductor
, T Connector Twin to Twin 0.4 ACSR 132kV T CONNECTOR FOR TWIN 0.4 ZEBRA TO TWIN 0.4 ZEBRA FOR 132/110KV (TYPE -
C2b), Benching of Soft Rock/Hard Murum Benching Earth cutting/benching for the purpose of preparing a minimum
square platform for the tower footing on the top of a hilllock including
removal of the excavated material beyond tower location upto 50 M lead
or filling it in the adjecent portion of the tower footing area in Soft
rock/Hard Murum with boulders.
, Restring Condr of S/C on M/C OCL, Mid Span Cmpr Joint- 0.4 ACSR Deer MID SPAN CMPR JOINT- 0.4 DEER, SSN H/w - 0.3 ACSR Goat Single Suspension Normal Hardware for 0.3 ACSR Goat Conductor
, Fixing Danger Boards, Pipe Type Earthing of Tower Leg, Fixing/Tightening of SS Nut Bolt, Fixing Anti Climbing Device =220kV, Raising 220kV Tower Leg Chimney Height, Fixing-Anti Theft nut Bolt of diff sizes, Vibration Damper - |
|
|
If you are a new user, then please
register, it's Free and then fill the form below.
If you are registered with us, just fill the form below, we will get back to you
shortly.
|
All fileds marked with '*' are compulsary.
|
|
|
|