| | Sector | abcMunicipal Corporations | Tender Value | INR 45 Lakhs | | Location | Tamil Nadu - India | Ref.No | 86695931 | | Closing Date | 19 - Sep - 2025 | | | | Construction of HSC Building in Periyagaram Village Periyagaram Panchayat, Civil Works , earthwork Excavation for Foundation (for Narrow Excavation) to Full Depth as Per Designed in All Soils and Sub Soils Except Soft Disintegrated Rock Not Requiring Blasting and Hard Rock Requiring Blasting and Bailing Water Wherever Necessary. Refilling the Sides of Foundation with Excavated Earth Other Than Sand in Layers of Well Rammed and Compacted and Depositing the Surplus Earth in Places Shown By the Departmental Officers with An Initial Lead of 10m and Initial Lift of 2m and Clearing and Leveling the Site Etc. Complete Complying with Standard Specification. , supplying and Filling in Foundations and Basement with Filling M Sand in Layers Not Exceeding 15 Cm. Thick, Well Watered , rammed and Consolidated Etc. Complete Complying with Standard Specifications. , plain Cement Concrete 148 - One Part Cementfour Part Sandeight Part Hard Broken Stone Jelly Using 40mm Gauge Hard Broken Granite Stone Jelly for Foundation Including Dewatering Wherever Necessary and Laid in Layers of Not More Than 15 Cm Thick, well Rammed, consolidated and Curing Etc.complete Complying with Standar Specification. , refilling the Approved Good Quality Earth in Plinths, Area Development Etc. Wherever Specified in Layers is Not Exceeding 200 Mm Thick, with Available Earth at Site. , supplying and Filling of Good Earth Locally Available Earth Transported From the Outside Including Consolidation, Leveling Specified in Layers of Not Exceeding 200 Mm Thick., Etc. Complete. , supplying and Erecting Centering for Sides and Soffits Including Supports and Strutting Up to 3.20 M Height for Plane Surface in All Floors with All Cross Bracing Using Mild Steel of Size 0.95 Cm X 60 Cm and 10 Guage Stilfaned Welded with Mild Steel Angle , up to Basement , ground Floor , design Mix Concrete , providing and Laying in Position Machine Batched, Machine Mixed and Machine Vibrated Design Mix Cement Concrete of M25 Grade for Reinforced Cement Ratio with Plasticizer Using 20mm and Down Concrete Structural Elements Under Controlled Water Graded Machine Broken Granite Stone Jelly Excluding the Cost of Centering and Shuttering and Reinforcement But Including Curing, Fixing, Fan Clamps Etc., as Per Standard Specification and as Directed By the Depart- Mental Officers Comple.-1m3 , foundation and Basement , fground Floor , steel - Fe 500 Supply, Fabrication and Placing of Reinforcement Steel of High Yield Strength Ribbed Bars of Various Diameters and Grade Conforming to is 1786 for Reinforced Concrete Work. the Work Includes Recoiling, Straightening, Cutting, Bending, Fabricating, and Placing in Position, at All Levels Including Lead and Lift, According to Drawings, Specifications Etc. Complete and Supply & Use of 18g Black Annealed Binding Wire Double Fold to Tie the Bars in Position and Providing Precast Cement/ Pvc Cover Blocks for Main Reinforcement to Ensure Specified Cover and Complete., Including All Labor Charges Etc as Directed By Departmental Officers. , brick Work in Following Cement Mortar 15 Using Best Quality Country Bricks of Size 8"3/4 X 41/4" X2 3/4" for Foundation and Basement Including Curing Etc., Complete Complying with Standard Specification. Including Scaffolding Curing Cost of Reinforcement Etc. All Complete as Per Specifications and Drawings as Directed By the Engineer In-charge. , brick Partition Walls of 11.50cm Thickness Using Best Quality Country Bricks of Size 8"3/4 X 41/4" X2 3/4" in Cement Mortar 13 (one Cement and Three Sand) Using Hoop Iron Reinforcement If Found Necessary Including Curing Etc. Complete and as Directed By the Departmental Officers. (hoop Iron Reinforcement Will Be Measured and Paid for Separately). , ground Floor , plastering Work , supplying and Applying of Two Coats of Putty of 3mm Thick Over the Exposed Rcc Surface of Ceiling Including Finishing the Joints Smoothy with Grinding Machine and the Surface Shall Be Thoroughly Cleaned Out of Dust and Scrubbing. the Surface Shall Then Be Allowed to Dry for Atleast 48 Hours. It Shall Then Be Sand Papered (waterproof Abrasive Sheet) to Give a Smooth and Even Surface. Any Unevenness Shall Be Made Good By Applying 1st Coat of Putty Mixed with Water on the Entire Surface Including Filling Up the Undulations and Applying 2nd Coat of Putty After 6 Hours of 1st Coat of Putty and Then Sand Papering (waterproof Abrasive Sheet) the Same After It is Dry and Finishing the Surface Smoothly, Etc., Complete Complying with Standard Specifications and as Directed By the Departmental Officers. [ the Rates Are Inclusive of Hire Charges for Grinding Machine with Wheel, Cost of Sand Paper (waterproof Abrasive Sheet), Cost of Putty Blade, Labour Charges for Grinding the Joints and Sand Papering, Two Coat of Putty, Scrapping the Putty Area to Level the Surface Smooth, Etc., Complete]. the Putty Shoule Be Got Approved By the Executive Engineer Before Use on Work. , providing & Applying 12 Mm T |
|
|
If you are a new user, then please
register, it's Free and then fill the form below.
If you are registered with us, just fill the form below, we will get back to you
shortly.
|
All fileds marked with '*' are compulsary.
|
|
|
|