Inquiry For Liaison Service
Sector abcShipping Tender ValueN.A.
LocationMaharashtra - India Ref.No47157195
Closing Date31 - Jan - 2022
Renovation of material and hr departments
Dismantling, clearing away and carefully stacking materials useful for reuse for any thickness of wall of brick, laterite or rubble in cement mortar including disposal of debris within as per directed by EIC etc. complete. Dismantling and removing tiles set in cement mortar including cleaning and stacking, serviceable materials and removing the debris as per directed by EIC etc. complete.
Disposal of building rubbish/ brick/AAC/tiles/soil/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for all lead and lifts, complete as per directions of Engineer-in-charge.
Providing and laying autoclaved aerated cement blocks masonry with 60x25x10cm or with nearest available size of AAC blocks conforming to IS 2185 part 3 ( with minimum compressive strength of 3Mpa to 4 Mpa and density ) in super structure above plinth level up to floor V level with CM 14 mortar and 20cm long, 8mm dia bars drilled to the wall in every alternate layers at locations of joints to the old wall ,all complete as per direction of Engineer-in-Charge. (excluding rate for reinforcement)
Providing Form work,Centering and shuttering including strutting, propping using shuttering sheet , supporting beams, supporting jacks,wooden planks and other incidentals etc. including removal of formwork after completion of work and clearing all materials and cost and conveyance of all materials labour etc
Reinforcement for RCC work including cost and conveyance of all materials, labour for, uncoiling ,straightening, cutting,bending, laying & tying with 22G binding wire etc.complete but excluding cost of steel (mild steel or tor steel) but including cost of binding wire.
Providing and laying reinforced cement concrete 111/23 using 20mm down graded broken granite metal for columns , beams and slabs including cost and conveyance of all materials, labour for mixing, laying, consolidating, curing, cost of dewatering etc.complete but excluding cost of cement, cost of formwork and cost of reinforcement. Above plinth level up to fourth floor level(formwork and reinforcement which will be measured separately).Above plinth level up to fourth floor level
Brick work with common burnt clay machine moulded modular bricks of class designation 12.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 16 (1 cement 6 coarse sand).For super structure
Painting with primer of approved quality and shade after rubbing and cleaning the surface including cost and conveyance of all materials,labour, scaffolding other incidentals, curing (wherever required) etc.complete.One coat cement primer on plastered surface
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Painting with ready mixed interior quality plastic emulsion paint of approved quality and colour after rubbing and cleaning the surface using wire brush, sand paper etc.One or more coats
Supplying and fixing 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS 14856, with approved accesories such as 100mm SS hinges 4 nos., 100mm Anodised aluminium tower bolt 1no., 150mm aluminium aldrop 1no., Chromium plated Brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles and necessary screws including cost of labour and all other incidentals etc. complete. ..With Frame of section 90 x 45 mm
Providing and fixing in position half glazed partition using 63.5x38.10x2mm thk.or nearest available size powder coated aluminium rectangular sections of approved quality and shade panelling with 8 mm thk.by particle board and 5mm thk plain glass fixed with necessary EPDM beading including cost and conveyance of all materials,labour etc.complete.
Supplying and pasting sun control film to the shutter of glazed doors/windows/partitions after cutting to the required size including cost and conveyance of all materials, labour other sundries etc. complete all as directed by the Engineer- in- charge. Check/ Strips frosted
Supplying and laying non-slippery/anti-skid ceramic flooring tiles of approved brand ,quality and colour set in CM 14 20mm thick and Jointing with grey cement slurry @ 3.3 kg/sqm for the proper binding of the tiles to line and level, pointing the joints with coloured cement to match with the tiles inclu
If you are a new user, then please register, it's Free and then fill the form below.

If you are registered with us, just fill the form below, we will get back to you shortly.


All fileds marked with '*' are compulsary.
Email Id : *
Comments: *
 Login/Register
Members/Visitors Login to continue
 Email Id:
 Password:


 Forgot Password?
 Tenders by Industry
Skip Navigation Links.
Expand Non-metallic Mineral Product TendersNon-metallic Mineral Product Tenders
more  »
Tenders by Ownership
Central Government/Public Sector Tenders
Co-operatives Tenders
Corporations/ Associations/ Others Tenders
Education & Research Institutes Tenders
Joint Sector Tenders
Non classified Tenders
Private Sector Tenders
Research Institutes Tenders
State Government Tenders
Trust Tenders
 Tenders by State in India
Andhra Pradesh Tenders
Delhi Tenders
Gujarat Tenders
Madhya Pradesh Tenders
Maharashtra Tenders
Rajasthan Tenders
Tamil Nadu Tenders
Uttar Pradesh Tenders
West Bengal Tenders
more  »