| | Sector | abcRoads | Tender Value | INR 39.20 Lakhs approx. | | Location | Uttar Pradesh - India | Ref.No | 86743372 | | Closing Date | 21 - Aug - 2025 | | | | Pond Rejuvenation in village- Alipura, YEA ,2.0 ,Cleaning jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1m aboveground level and removal of rubbish up to distance of 50m out side the periphery of the area cleared ,Pumping out water by Diesel pump of discharge capacity of 4000 lts per hour including fuel operator , suction & delivery pipes of size 4'' X 4'' length 150 as per direction of Engineer in Charge ,Item code morth 301 Excavtion in soil using hydraulics excavator and tippers with disposal upto 1000 meters Excavation for road work in soil with hydraulics excavator including cutting and loading in tippers, trimming bottom and side slopes in accordance with requiremements of lines , grades and cross section and transportation to the embankment location within all lifts and lead upto 1000 meters ,Add extra for sludge/mud/liquid 50% of Excavated earth 25% of H.No.3 UP PWD ,Providing and laying in position cement concrete with 4 cm gauge approved stone ballast c sand and cement in pro of 841 including supply of all material labour tools and plants etc req for proper comp of work ,Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.
(Note- Cement content considered in this item is @330 kg/cum.Excess/less cement used as per design mix is payable/recoverable
All work up to Plinth level.
UPPWD/SOR/DAR/5.33.1 ,Rinforcement for R.C.C. work including straightening. Cutting Bending placing in position and bending all complete upto plinth level using Hot rolled Deformed bars. (UPPWD/SOR2020/5.22.3) ,Centering & Shuttering including strutting. propping etc and removal of form work for.
Foundation footing bases of column etc. (UPPWD/SOR-2020/5.9.1) ,Suspended Floors, roofs, landings, balconies, and access floors. (UPPWD/SOR-2020/5.9.3) ,Edges of slab and breaks in floor and walls under 20cm wide. (DAR/5.9.16.1/ Based on UPPWD/SOR-2020) ,Laying non-pressure NP2 class R.C.C Pipe jointed with stiff mixture of cement mortar in the proportion of 12(1cement 2 coarse sand) including testing of joints etc, 250mm UP PWD SOR-2020/DAR-18/ NP2 pipe ,Cement Concrete with 4cm gauge approved stone ballast corse sand and cement in the propertion of 841 including supply of all material labour tools and plants etc required for proper completion of the work ,M-150 brick work in 16 cement & fine sand 1.25f.M mortar in foundation and plinth including supply of all materials labour complection of the work compiation of work (148) ,Cement Concrete with 4cm gauge approved stone ballast corse sand and cement in the propertion of 421 including supply of all material labour tools and plants etc required for proper completion of the work. Same as above item no.279 but with 2cm gauge stone grit in stend of 4cm gauge stone lallast. UP PWD SOR-2020/DAR-18/279a ,Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (DAR/10.25.2/Based on UPPWD/SOR-2020)) ,Supplying and stacking at site 53mm to 22.4mm siza stone aggregate ,Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. ,R.C.C. Standards post/ struts/rails/ pales of mix 11.53 (1 cement 1.5 coarse sand 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in- charge (cost of earth works in excavation, concrete works in foundation to be paid separately). ,12mm Cement Plaster of mix 16 (1 cement 6 coarse sand) |
|
|
If you are a new user, then please
register, it's Free and then fill the form below.
If you are registered with us, just fill the form below, we will get back to you
shortly.
|
All fileds marked with '*' are compulsary.
|
|
|
|