Ref. No. : 36634057   
Company Name : Can be viewed by Subscribers
Product Detail : Supply of constructional material and compact item - local sand, medium sand, course sand, portland cement, 1st class traditional brick (kiln burnt), 1st class picket jhama brick, stone aggregate (6mm nominal size) (pakur variety), "hire charges of shuttering plank with prop including all fittings , (25mm to 30mm thick)", hire charges of concrete mixer 0.25 to 0.40 cum with hooper including fuel and operator, polythene sheet (150 gm per sqm), thermocol 12.5 mm thick., installation of concrete display board as per specification, supply of reinforcement bar (tata/sail/srmb etc), supplying, fitting & fixing structural members of specified sections weighing less than 22.5 kg./m, supplying 1.5mm thick m.s. sheet fitted and fixed on one or both faces of m.s./ w.i. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials. for door shutter, "supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to is 1038-1975 and manufactured from rolled steel sections conforming to is 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete (124) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. without integrated grills, (b) openable steel windows as per is sizes with side hung shutters, and horizotal glazing bars.", "m.s.or w.i. ornamental grill of approved design joints continuously welded with m.s, w.i. flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor., (i) grill weighing above 10 kg./sq.mtr and up to 16 kg./sq. mtr., "white washing including cleaning and smoothening surface thoroughly., (c) three coats (on new works only)., (nb quantity count on plastered surface on building portion only excluding the quantity of neat cement punning)", "applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification., (iii) two coats., priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc., painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary, (b) on steel or other metal surface, (iv) two coats (with any shade except white), a. steel surface , supplying, fitting & fixing 1st quality ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring, oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc., (a) floor, with sand cement mortar (14) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91kg/sq.m & joint filling using white cement slurry @ 0.20kg/sq.m., (a) area of each tile upto 0.09 sq.m, (i) coloured decorative", "(b) wall, with sand cement mortar (13) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 kg/sq.m & joint filling using white cement slurry @ 0.20kg/sq.m., (a) area of each tile upto 0.09 sq.m, (i) coloured decorative", "supplying fitting approved type ventilator in position after cutting holes in walls setting in cement mortar mending damages to wall and plaster and two coats of paint of approved brand of any shade. payment of mending good damages of wall & plaster and painting to be made separately, (b) r.c.c ventilator of 20 mm. thick, (i) upto 0.10 sq.m. area", supplying, fitting and fixing orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'p' or 's' trap (ii) 530 mm x 410 mm, "soil pipe, supply of upvc pipes (b type) & fittings conforming to is-13592-1992, (a) (i) single socketed 3 meter length, (b) 110 mm", "supplying,fitting and fixing cast iron 'p' or 's' trap conformimg to i.s. 3989 / 1970 and 1729 / 1964 including lead caulked joints and painting two coats to the exposed surface., (a) 'p' trap (iii) 100 mm", "supply of upvc pipes (b type) & fittings conforming to is-13592-1992, (a) (i) single socketed 3 meter length (a) 75 mm", xv) vent cowl (a) 75 mm, making shed by thatch eve covering the pit including bamboo post with frame at a minimum height of 7' (seven fit) with all necessary articles as per direction of eic (item for vermi compost pit), "square or hexagonal mesh netting made with 18 b.w.g. galvanised wire, fitted and fixed complete as per design, (excluding the supporting framewo
Document Sale To : 15-10-2019 at 16:00 Hrs
Tender Location : West Bengal - India
Document Path : Can be viewed by Subscribers
Tender EMD : INR 20000
Tender Closing Date : 15/10/2019 at 00:00 Hrs.
Tender Opening Date : 17/10/2019 at 16:00 Hrs.
Address : Can be viewed by Subscribers
Sub-Industry/Industry : Other Services - Financial Services   
 Login/Register
Members/Visitors Login to continue
 Email Id:
 Password:


 Forgot Password?
 Tenders by Industry
Skip Navigation Links.
Expand Non-metallic Mineral Product TendersNon-metallic Mineral Product Tenders
more  »
Tenders by Ownership
Central Government/Public Sector Tenders
Co-operatives Tenders
Corporations/ Associations/ Others Tenders
Education & Research Institutes Tenders
Joint Sector Tenders
Non classified Tenders
Private Sector Tenders
Research Institutes Tenders
State Government Tenders
Trust Tenders
 Tenders by State in India
Andhra Pradesh Tenders
Delhi Tenders
Gujarat Tenders
Madhya Pradesh Tenders
Maharashtra Tenders
Rajasthan Tenders
Tamil Nadu Tenders
Uttar Pradesh Tenders
West Bengal Tenders
more  »